DAC8741H
- HART-compliant physical layer modem
- 1200-Hz, 2200-Hz HART FSK sinusoids
- Register programmable amplitude of TX signals (DAC8741H only)
- Integrated RX demodulator and band-pass filter with minimal external components
- FOUNDATION Fieldbus compatible H1 controller and medium attachment unit (MAU)
- 31.25 kbit/s communication based on Manchester-coded bus powered (MBP)
- Integrated Manchester encoder and decoder
- Compatible with PROFIBUS PA
- Low quiescent current: 180 µA max at typical industrial operating temperature range (–40°C to +85°C)
- Integrated 1.5-V reference
- Flexible clocking options
- Internal oscillator
- External crystal oscillator
- External CMOS clock
- Digital interface
- DAC8740H: UART
- DAC8741H: SPI
- Reliability: CRC bit error checking, watchdog timer (DAC8741H only)
- Wide operating temperature: –55°C to +125°C
- 4-mm × 4-mm QFN package
The DAC8740H and DAC8741H (DAC874xH) are HART®, FOUNDATION Fieldbus™, and PROFIBUS PA compatible low-power modems designed for industrial process control and industrial-automation applications.
In HART mode, the DAC874xH integrates all of the required circuitry to operate as half-duplex HART physical layer modems, in either slave or master configurations with minimal external components for filtering. In FOUNDATION Fieldbus mode, the DAC874xH integrates all of the required circuitry to operate as half-duplex FOUNDATION Fieldbus compatible H1 controllers and MAUs.
The HART, FOUNDATION Fieldbus, or PROFIBUS PA, data stream can be transferred from the microcontroller through either a UART interface or an integrated FIFO accessed by a SPI interface. The SPI interface includes an SDO pin for daisy-chain support, various interrupts, and other extended features.
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | DAC874xH HART® and FOUNDATION Fieldbus™ and PROFIBUS PA Modems datasheet (Rev. D) | PDF | HTML | 2019/05/02 |
Application note | HART-Enabled Transmitter Based on an Evaluation Module Design | PDF | HTML | 2025/03/26 | |
Application note | Design and Test of a HART-Enabled Field Transmitter for 4-20mA Loops | PDF | HTML | 2024/10/17 | |
Application note | A Basic Guide to the HART Protocol | PDF | HTML | 2023/11/09 | |
Application brief | Designing Foundation Fieldbus and Profibus PA Devices with the DAC874xh Modem Fa | 2019/03/04 | ||
Application brief | Implementing HART in PLC Analog Input Modules for Real-Time Communication | 2018/11/05 | ||
Application brief | Implementing HART in 2-Wire Field Sensor-Transmitters | 2018/10/03 | ||
EVM User's guide | DAC8742H Evaluation Module User's Guide (Rev. A) | 2017/11/14 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DAC8742HEVM — DAC8742H 평가 모듈
DAC8742H 평가 모듈(EVM)은 DAC8742H 장치의 기능 및 성능을 평가하기 위한 플랫폼으로 사용이 간편합니다. DAC8740H, DAC8741H, DAC8742H는 HART®, FOUNDATION Fieldbus™, PROFIBUS PA 규격을 준수하는 저전력 모뎀으로 산업 공정 제어 및 산업 자동화 애플리케이션에 적합하게 설계되었습니다. DAC8742HEVM은 USB2ANY 및 평가 소프트웨어를 포함하는 종합 평가 키트로 Microsoft Windows® XP 및 Windows® 7/8/10 운영 체제와 호환됩니다.
ANALOG-ENGINEER-CALC — 아날로그 엔지니어의 계산기
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
지원되는 제품 및 하드웨어
제품
직렬 전압 레퍼런스
정밀 ADC
바이오센싱 AFE
통합 정밀 ADC 및 DAC
고속 ADC(≥10 MSPS)
정밀 DAC(≤10 MSPS)
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
VQFN (RGE) | 24 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.